About:
This model adopts Japan AC digit servo control system,15 inches colorful touching screen of resolution rate is 0.01mm, has self-diagnostic function of troubles and displays the operating pattern. It has 100 program units, more than 10000 different cutting position dynamic cutting display, running situation, dynamic follow-up. The max paper-pushing speed is 5-18m/min, it adopts stronger computer operating system. It can memorize store the storage time can be up to 300000 hours above . It has self maintenance to the operating system. Italy hydraulic components, France.Germany .Japan and korea electric components. Taiwan ball lead screw and linear guide-rail are used. PLC controller can monitor all the electrical and mechanical section. Its key parts adopt imported bearing of low maintenance.

Technical parameters：

Model		166
B	cm/in	261/102.8"
H	cm/in	165/65"
I	cm)in	59/23.2"
M	cm/in	76/30"
Cutting width	cm/in	166/65.4"
Max cutting height without assistance pressing plate	cm/in	16.5/6.5"
Max. cutting depth	cm/in	166/65.4"
Min cutting depth without assistance pressing plate	cm/in	3/1.2"
Extended length of working table	cm/in	75/29.5"
Height of working table	cm/in	89-92/35"×36.2"
Machine width including side working table	cm/in	322/126.8"
Total length of working table	cm/in	283/111.4"
Cutting speed	r/min	42
Max.paper pressure	N	60000
Power of main motor	kw	5.5
Motor for paper feeding	kw	1.00
Air pump	kw	0.75×2
Machine weight	kg	5500
Overall dimension(L×W×H)	cm	315×160×215
	in	124"×63"×85"
Blade speciffications(L×W×H)	cm	190.5×16×1.37
	in	75"×6.3"×0.54"